讯海轴承/SKF/圆柱滚子轴承/NNCL 4934 CV

SKF NNCL 4934 CV 圆柱滚子轴承 170×230×60 mm斯凯孚 · 瑞典

圆柱滚子轴承 · 主要尺寸 170×230×60 mm

关键尺寸

170内径 d / mm
230外径 D / mm
60宽度 B / mm

资料下载

SKF NNCL 4934 CV 技术参数

尺寸
SKF NNCL 4934 CV 尺寸示意图
孔径170 mm
外径230 mm
宽度60 mm
孔径170 mm
外径230 mm
宽度60 mm
内圈挡边直径194 mm
外圈滚道直径215.08 mm
外圈润滑槽宽度7 mm
润滑孔直径(外圈)4 mm
正常位置轴承套圈相对于其他套圈允许轴向位移4 mm
倒角尺寸 (开式轴承)2 mm
性能
基本额定动荷457 kN
基本额定静负荷950 kN
参考转速1200 r/min
极限转速1500 r/min
属性
轴承部件整套轴承
轴向位移能力两个方向上
列数2
定位特征,轴承外圈不带
孔类型圆柱孔
保持架不带
法兰数量,外圈0
挡边数量,内圈3
活套法兰无
径向游隙CN
公差等级正常
涂层不带
密封不带
润滑剂无
补充润滑功能带
可修复产品是
新产品的指示性碳足迹27.1 kg CO<sub>2</sub>e
再制造产品的指示性碳足迹9 kg CO<sub>2</sub>e
挡肩尺寸
SKF NNCL 4934 CV 挡肩尺寸示意图
轴挡肩直径180 mm
轴承座挡肩尺寸220 mm
倒角半径2 mm
数据计算
基本额定动荷457 kN
基本额定静负荷950 kN
疲劳载荷限值100 kN
参考转速1200 r/min
极限转速1500 r/min
最小载荷系数0.25

产品说明

Double row cylindrical roller bearings are designed to accommodate high to very high radial loads in combination with medium to high speeds. The SKF assortment includes many designs and variants, such as standard and full complement bearings and also greased and sealed bearings. Depending on the configuration of the outer and inner rings, the bearings are available in locating as well as non-locating designs. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.

尺寸图纸

SKF NNCL 4934 CV 尺寸图纸

点击图纸可放大查看,再次点击关闭。

同尺寸其他型号

以下型号与 SKF NNCL 4934 CV 的主要尺寸相同(d 170 × D 230 × B 60 mm),可用于同尺寸替代选型。

同系列相近型号